SARS-Cov-2＆Influenza A＆B Combo Rapid Test Cassette (swab)
【DIRECTIONS FOR USE】
1.Remove the test device from the sealed foil pouch and use it as soon as possible. Place the
test device on a clean and level surface. Best results will be obtained if the assay is performed
immediately after opening the foil pouch.
2. Take out the Extraction Tube.
3. Take out 1 bottle of Sample Extraction Buffer, remove the bottle cap, add all the extraction
buffer into the extraction tube.
4.Place the sterilized swab specimen in the sample extraction buffer. Rotate the swab for
approximately 10 seconds while pressing the head against the inside of the tube to release the
antigen in the swab.
5.Remove the sterilized swab while squeezing the sterilized swab head against the inside of
Buffer as you remove it to expel as much liquid as possible from the swab. Discard the sterilized
swab in accordance with your biohazard waste disposal protocol.
6. Screw on and tighten the Nozzle with Filter onto the specimen collection tube, then shake the
specimen collection tube vigorously to mix the specimen and the sample extraction buffer.
See illustration 4.
7.Add 3 drops of the solution (approx.80ul) to each sample well and then start the timer. Read
the result at 10~20 minutes. Don’t interpret the result after 20 minutes.